← TRACKS 4 TRUCKERS™Our Community Blog
← The Highway Hobo
Roads & Route Planning

I-95 North Near MD 32 Drops to One Lane Friday Night: A Truck-Specific Planning Guide

Published · TRACKS™ Editorial

Emergency bridge-joint work starts October 30 near Columbia, Maryland. Build a delivery plan around reduced capacity, and do not mistake a general detour suggestion for truck authorization.

Four schematic lane panels show three closed lanes and one open lane, with the repair start time below.
Original capacity diagram, not an exact lane-position or roadway-layout drawing. Source: Maryland SHA; all times Eastern.

The work window northbound drivers need

Maryland SHA announced October 28 that emergency bridge-joint repairs will close three northbound I-95 lanes before westbound MD 32, Exit 38B, in the Columbia area. Work starts Friday, October 30, at 9 p.m. and continues overnight and through Saturday, October 31, until the replacement is complete. One northbound lane remains available. The notice does not promise a specific Saturday reopening hour. All times in this article are local Eastern time.

A passenger-vehicle alternative can be the wrong truck route

The SHA notice suggests US 1, US 29 and MD 295/Baltimore-Washington Parkway as alternatives for motorists. Truck dispatchers need an additional check: the National Park Service explicitly prohibits commercial vehicles on the Baltimore-Washington Parkway. Do not take that parkway simply because it appears in a general traffic advisory. Our routing recommendation is to verify the entire proposed alternate for your truck, cargo, dimensions and permits. US 1 and US 29 appearing in an advisory is not a blanket clearance for every movement or every connecting street. Use posted restrictions, current agency information and your carrier’s route-approval process.

A parkway commercial-vehicle restriction appears above two panels for route checks and pre-trip confirmation.
Original editorial diagram. NPS prohibits commercial vehicles on the Baltimore-Washington Parkway; this graphic does not authorize an alternate route.

Protect the appointment before reaching the queue

For a northbound delivery, compare the planned approach time with the construction start before accepting a tight arrival window. Ask dispatch to identify an approved route and a legal stopping option upstream. If the customer has a strict gate cutoff, explain the known work window and agree on how an updated ETA will be communicated. These are planning suggestions, not a forecast of a specific delay. The agency has not supplied a truck queue time. Avoid filling that gap with an invented number. A clear customer update based on the actual lane reduction is more useful than a precise-looking estimate without support.

Recheck while safely parked

Check SHA’s current project notice and Maryland traffic conditions before departure and again before committing to the corridor. Have dispatch monitor changing conditions if you are already driving. A single open lane still means traffic can pass, but it does not make an ordinary travel-time assumption dependable. Keep the advisory date and route decision with your trip notes. If conditions change, update the plan from a safe stopping location. Follow work-zone signs and traffic control rather than a saved screenshot or an old navigation instruction.

Sources & verification

Reporting facts are attributed to the sources above. Practical takeaways and labeled calculations are The Highway Hobo’s analysis. Request a correction.