← TRACKS 4 TRUCKERS™Our Community Blog
← The Highway Hobo
Permits & Route Planning

California Oversize Permits: What to Check in the Nov. 9–15 Restriction Update

Published · TRACKS™ Editorial

Caltrans publishes weekly restrictions and updates them daily. Check your authorized route before departure and keep the restriction information with your permit.

Four cards show the weekly edition, daily changes, route check and trip packet.
Original editorial diagram. For the annual and repetitive permit workflow described by Caltrans.

The weekly edition is a starting point

Caltrans lists a November 9–15 temporary restriction edition for annual permit holders. The agency also updates the underlying list daily as conditions change. A dispatch office might print the information on Monday for a move that leaves Thursday. The printout identifies the edition, but it does not establish that every authorized segment will still be clear Thursday. Check the Route Clearing database before each trip.

Check the actual loaded combination

Start with the permitted route and the loaded dimensions and axle configuration. Match the direction and effective hours of each relevant restriction to your estimated arrival at that segment. For instance, if a delayed pickup shifts an approach from morning into an afternoon work period, check the segment again. Do not assume a temporary restriction applies in both directions or that a nearby road is an approved detour. Caltrans notes that local permits can still apply on relinquished route segments.

Give the driver the permit and restriction information

Caltrans says annual and repetitive permit holders must receive the restriction information and carry and display it with the permit during moves, on paper or electronically. Keep both together in the driver’s trip packet. Note when the route was checked and confirm that the driver can retrieve the information away from the office.

Checklist covers the load, segment, documents and conflicts.
Original editorial diagram. Planning checklist, not authorization for a particular move.

Resolve conflicts before dispatch

If the route and restriction conflict, give permit staff the exact segment, direction, hours and loaded dimensions. Confirm any revised route with the appropriate authority before sending the truck. A trip completed with a different load or axle configuration does not establish clearance for this one. The weekly bulletin is an operational update under the existing permit process; it does not announce a new statewide permitting law.

Sources & verification

Reporting facts are attributed to the sources above. Practical takeaways and labeled calculations are The Highway Hobo’s analysis. Request a correction.